Give your hardscape a glossy, wet-look finish that pops with the SRW Products HG High Gloss Paver Sealer — a water-based, color-enhancing high-gloss acrylic film sealer that protects concrete pavers from salt, freeze/thaw cycles, and UV while locking joint sand against washout, weeds, and ants. Available in a 1-gallon jug for accent walls and small patios or a 5-gallon pail for full driveways and contractor jobs.

Model #: SSPSPRO (1-gallon jug) / SSPSPRO 5GAL (5-gallon pail) · Available in: 1 Gallon or 5 Gallons

Specifications

• Type: Water-based high-gloss film-forming acrylic sealer
• Finish: High-gloss, wet-look, color-enhancing
• Coverage: 150 sq ft per 1-gallon jug · 750 sq ft per 5-gallon pail (150 sq ft / gallon)
• Suitable for: Concrete pavers (per manufacturer); also commonly applied to manufactured stone — ask dealer for stone compatibility
• Not for use on: Surfaces with hydrostatic pressure or where a non-film penetrating finish is required
• Interior / Exterior: Both
• Application Temperature: 50°F–80°F (10°C–27°C)
• Dry Times: Tack-free 25 min · Foot traffic 24 hr · Vehicle traffic 72 hr
• Coats: Single coat for high-gloss finish; apply a second coat 4+ hours later for the deepest sheen
• Application Tools: Slit foam roller and sprayer (spray then back-roll for best results)
• Cleanup: Soap and water
• Storage: Keep from freezing; store in a cool, well-ventilated place
• Shelf Life: Use within 1 year of manufacture
• HMIS Rating: Health 2 · Flammability 2 · Reactivity 0 · Protection I (gloves, goggles, face shield)
• Composition: Water, acrylic copolymer, light aromatic petroleum naphtha, plasticizer, ester alcohol
• DOT Shipping: Not regulated

Why Use a High-Gloss Sealer?

• Highest sheen and most dramatic color depth in the SRW paver-seal family
• Wet-look finish makes paver tones pop — especially after a rinse or rain
• Stabilizes joint sand — prevents washout, weed germination, and ant infestation
• Adds UV protection that slows fading on sun-exposed patios and walkways
• Resists salt and freeze/thaw damage on driveways and walkways
• Easier maintenance: stains, dirt, and water rinse off cleanly

Which Size Should I Buy?

• 1 Gallon (covers 150 sq ft) — small patios, accent walls, retaining-wall caps, touch-ups, contractor service calls
• 5 Gallons (covers 750 sq ft) — full driveways, large patios, multi-room paver installs

Application

1. Wait 28 days after installing polymeric sand before sealing.
2. Clean and prep the surface with an SRW General Purpose Cleaner; spot-treat stains with the appropriate Specialty Clean product.
3. Wait 24 hours after cleaning so the surface and joints are completely dry.
4. Stir thoroughly. Apply with a slit foam roller and sprayer — spray, then back-roll. Two-person application is recommended.
5. Start at the highest elevation and work downhill. Do not allow sealer to pool on pavers or in joints.
6. Cure for 24 hours; protect from rain. Vehicle traffic after 72 hours.

Tip: For added slip resistance on pool decks and stair treads, top with SRW SR Slip-Resist.

Safety note: If swallowed, do NOT induce vomiting — immediately drink 1–2 glasses of water and seek medical attention. Wear chemical-resistant gloves, ANSI Z87.1 goggles, and respiratory protection during spray application.

For full chemical, application, and safety information, see the HG High Gloss Paver Sealer Technical Data Sheet and Safety Data Sheet (SDS).