Wharfedale Pro WLA-112A Active Hybrid Curvature Array Element (12")

The Wharfedale Pro WLA-112A is an active, bi-amplified 12" coaxial Hybrid Curvature Array element built for fast deployment and consistent audience coverage in a wide range of venues. By combining a coaxial Beyma driver with the EVO-Fold® waveguide, the WLA-112A is designed to deliver clear, uniform mid-high projection with controlled vertical dispersion for flying arrays, ground stacks, or horizontal array configurations.

Inside, powerful Class D amplification and DSP processing with FIR filters make it easier to achieve refined, repeatable results without external amp racks. With eight onboard FIR presets and RS485 networking for remote control, the WLA-112A supports tidy system wiring and quick optimization for different array sizes and deployment goals.

Active Hybrid Curvature Array Design For Consistent Coverage

The WLA-112A uses a coaxial full-range approach intended to provide consistent coverage across both horizontal and vertical planes. It also introduces hybrid curvature deployment with selectable rigging angles (0°, 5°, 10°, 15°) to help shape coverage accurately while keeping setup practical for real-world shows and installations.

Key Features Of The WLA-112A Active 12" Coaxial Array Element

• Active Bi-Amplified System: Integrated Class D amplification for simplified setup and fewer external components.
• DSP With FIR Filters: Eight onboard FIR presets support fast tuning for different configurations and performance needs.
• 12" Coaxial Beyma Driver (Europe-Made): Coaxial design supports consistent coverage characteristics across planes.
• EVO-Fold® Waveguide: Designed to reduce typical phase issues associated with traditional two-way line array layouts.
• RS485 Network Control: Remote control capability via RJ45 network connection for streamlined system management.
• Hybrid Rigging Angles: Built-in rigging brackets with 0°/5°/10°/15° vertical splay options plus 15° horizontal splay.
• Professional I/O And Status Indicators: Balanced XLR input/link plus clear LED indicators for signal, limiter, and power status.
• Tour-Ready Enclosure: 15 mm plywood cabinet with Rhino Rock finish and powder-coated steel grille.

Technical Specifications: Wharfedale Pro WLA-112A

• System Typology: Hybrid Curvature Array
• System Type: Active 12" coaxial bi-amplified
• Configuration: Two-way
• Frequency Response (+/-3 dB): 55 Hz – 20 kHz
• Frequency Range (-10 dB): 35 Hz – 25 kHz
• Sensitivity (2.83 V/1 m): 101 dB
• Calculated Maximum SPL @ 1 m: 133 dB
• System Peak SPL: 139 dB
• Waveguide Type: EVO-Fold®
• Nominal Coverage (H x V): 100° x 20°
• Signal Processing: DSP-based, 8 FIR presets
• Preset List: A) 1 to 2 SPKR 100 Hz HPF; B) 3 to 4 SPKR 100 Hz HPF; C) 5 to 6 SPKR 100 Hz HPF; D) 1 SPKR; E) 2 SPKR; F) 3 to 4 SPKR; G) 5 to 6 SPKR; H) CUSTOM
• Amplifier Design: Class D
• Power Rating: 1360 W peak (1200 W LF + 160 W HF); 680 W continuous (600 W LF + 80 W HF)
• Input Sensitivity: +4 dBu
• Maximum Input Level: +18 dBu
• Input Impedance: Balanced: 10 kΩ
• Input Connector: Balanced socket XLR
• Link Connector: Balanced pin XLR
• Update Port: USB Type B
• Network (RS485): RJ45
• AC Power Options: AC 100–120 V~ and 220–240 V~, 50/60 Hz automatic
• Protection: Independent LF/HF RMS and peak limiters; DC and short protection; clip limiter; thermal shutdown with auto reset; low line voltage shutdown (60% nominal)
• Special Features: Copper demodulating rings in LF and HF units; waterproof LF cone; shared high-performing ferrite magnet system design
• Rigging Points: 3 points
• Vertical Splay Angle Range: 0° / 5° / 10° / 15°
• Horizontal Splay Angle: 15°
• Accessories: WLA-1 Fly Frame
• Stand Pole: Dual angle -2.5° / +7.5°
• Handles: 2 side / 2 back
• Cabinet Type: Trapezoid
• Enclosure Material / Finish: 15 mm plywood / Rhino Rock
• Colour: Black paint
• Grille Material / Finish: Powder-coated perforated steel
• Dimensions (Unpacked): Height (front) 13.1 in; height (rear) 9.7 in; width 22.3 in; depth 18.3 in
• Dimensions (Packed): Height 26.0 in; width (front) 21.7 in; width (rear) 21.7 in; depth 16.7 in

Driver And Performance Details

• Driver Type: 12" coaxial Beyma driver
• LF Voice Coil: 4.0"
• HF Voice Coil: 2.87"
• Continuous Power: 680 W
• Peak Power: 1360 W
• System Peak SPL: 139 dB