These GT7 Pro Racing 66cc bicycle engine kits give 3.85 HP “the little powerhouse engine of the industry.”

3.85 HP 2 cycle gas/oil mix bike motor kits. GT7 Pro Racing 66cc/80cc Bike Motor Kit: 1/2 gal. gas tank, chain and sprocket, handlebar controls, mounting hardware package and instruction sheet. Total wt. is 24 to 27 lbs.

Starting your GT7 Pro Racing 66cc/80cc Bike Motor Kit (Standard Finish): Pedal normally or use engine power at your option. The engine starts quickly when the handlebar clutch lever is released while pedaling. Twisting the throttle controls the speed to 45 mph. Speed depends on rear sprocket ratio and weight of rider.

GT7 Pro Racing 66cc/80cc Bike Motor Kit (Standard Finish) fits best on bikes with 25 to 30mm diameter 70 degree Vee type frames but can be installed on larger diameter tube frames with modifications. “Looks Cool” on the older cruiser type coaster brake bikes.
This bike motor kit comes with everything that you'll need except gas and oil! You will be able to stop or start the engine as you ride. There is no rope pulling needed and it gives more speed and gets around 150 miles on a gallon of gas. Please Tell a Friend about this product and help spread the word about Motorized Bicycles.

Get your GT7 Pro Racing 66cc/80cc Slant Head Bike Motor Kit (Standard Finish) now while supplies last at this price.

This motorized bicycles includes:

1. 26" Hyper Cruiser
2. GT7  Pro Racing 66cc/80cc Motor 3.85 HP
3. WITH RACING CNC CYLINDER HEAD - $90 VALUE!
4. With GT80 Reed Valve & Keihin Carburetor Clone Assembly - $60 VALUE!
5. Friction Clutch; Pedal Start
6. Magneto With Solid State CDI Ignition
7. 44Tooth, 9 Hole Chrome Sprocket
8. 3 Plate Sprocket Kit
9. 2.0 Liter Fuel Tank, Tear Drop Shape (Black Color)
10. Chrome Muffler
11. Push Button Clutch Lever And Cable
12. Twist Throttle With Engine Kill Switch
13. Improved Gas Valve
14. Fuel Line #2
15. Idler Pulley Chain Tensioner with Bearings
16. Chrome Lined Cylinder Wall
17. Head With Center Fire Spark Plug
18. 202 Crankcase Bearings
19. Needle Bearings On Piston Wrist Pin
20. Improved 415 Chain
21. Chain Guard
22. Tool Kit
23. All The Mounting Brackets, Gaskets, And Hardware Including Nylon Locking Nuts
24. Universal Motor Mount
25. Complete User Manual
26. 6-Month Limited Warranty Included - FREE
27. Extra Standard Slant Cylinder Head

Bicycle Requirements:

This bicycle motor engine kit fits most Mens 26" and larger bicycles which includes mountain, cruiser, chopper and road bikes with a V-frame with at least a 8.5" height clearance for the engine. Larger frame size requires drilling into bike frame and use of the universal face plate.

Dimensions:

This 66cc/80cc bicycle motor engine kit is about 8.5" height 7" length 5" width and fits on most standard 26" or 25mm 29mm frame bicycle frame tubes. Larger frame size requires drilling into bike frame and use the universal face plate. This engine kit only adds about 24 lbs to your bike.

How to Install 80cc 66cc 48cc 2-Stroke Bicycle Engine Kit

Skills And Experience:

The buyer may need some basic hardware skills, tools, and it takes roughly around 2-3 hours to install and to do some adjustments and fine tuning.

Notices And Disclaimer:

• We cannot guarantee that this kit will fit your specific individual bike(s).
• Operating a bike, motorized bicycle or bike with a bicycle engine kit installed involves some risk of serious bodily injury. Buyer accepts responsibility for any and all vehicle operation that may lead to personal injury, economic loss, social distress, other losses, costs and damages.
• Seller is not responsible for injuries and/or damages resulting from operating this motorized bicycle or bicycle engine kit.
• Seller is not responsible for misuse of this kit or any warranty after installation.