20% OFF shipping at wellness-welten.net on orders over $79 + up to 10% OFF products

Ship to:

/ English / USD

New Arrival

Air Freeshipping Best Sellers Nihao Choice

Sourcing

Shipping Calculation

home > 100Ah 48V Lithium Battery Waterproof Chassis Mount IP67 > 100Ah 48V Lithium Battery Waterproof Chassis Mount IP67

100Ah 48V Lithium Battery Waterproof Chassis Mount IP67 main image 0

100Ah 48V Lithium Battery Waterproof Chassis Mount IP67 main image 1

download picture

description

Report this seller or product

100Ah 48V Lithium Battery Waterproof Chassis Mount IP67DESCRIPTION Description 48V CARAVAN POWER, DONE PROPERLY MORE EFFICIENCY, ZERO EXCUSES TO STAY ON THE GRID A 48V caravan system delivers advantages that lower voltage setups simply can't match higher inverter efficiency, lower cable current draw, reduced power losses over longer runs, and the ability to run serious loads without the weight and complexity of parallel battery banks. The AllSpark 100Ah 48V chassis mount is designed and developed in

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

product description

Why choose thelockerguy wholesale?

DESCRIPTION

48V CARAVAN POWER, DONE PROPERLY — MORE EFFICIENCY, ZERO EXCUSES TO STAY ON THE GRID

A 48V caravan system delivers advantages that lower voltage setups simply can't match - higher inverter efficiency, lower cable current draw, reduced power losses over longer runs, and the ability to run serious loads without the weight and complexity of parallel battery banks.

The AllSpark 100Ah 48V chassis mount is designed and developed in Australia by Offroad Living specifically for 48V caravans and motorhome builds that demand efficiency, compliance, and long-term reliability.

IP67 rated and IEC 62619 certified as a complete battery unit, it's built from powder-coated stainless steel and mounts above the chassis rail - preserving your ground clearance on corrugated tracks and creek crossings. Full Bluetooth monitoring is integrated into the BMS at no extra cost, giving you precise 48V caravan power data on your phone in real time.

If you're building or upgrading to a 48V system, the AllSpark 100Ah 48V is built for exactly that purpose.

48V Chassis Mount - Clearance Preserved, Power Maximised

Purpose-built 48V caravan power should not come at the cost of your ground clearance. The AllSpark 100Ah 48V chassis mount has in built mounting points, allowing for it to be installed securely above the frames lowest point - so the frame remains the lowest point, keeping your vehicle's original clearance for the tracks that make a 48V build worthwhile.

No hanging below the chassis. No compromise on capability.

Certified to Australian Standards - Complete Battery

IEC 62619 certification on the cells alone doesn't mean the complete battery is safe or compliant. AllSpark batteries are independently tested and certified as complete assembled units - cells, BMS, housing, workmanship - the lot.

For piece of mind and reliability - it's the stamp of approval you've been looking for.

48V System Monitoring - Built Into the Battery

Monitoring a 48V caravan power system accurately requires data from inside the BMS, not a shunt bolted on externally. AllSpark's integrated Bluetooth monitoring gives you individual cell voltages, state of charge, current in and out, cycle count, and full charge history - direct from the source.

This chassis mount battery comes fully enclosed in a tough stainless steel casing, meaning you also don't have to fork out for a flimsy caravan battery box, adding another $100+.

Included in the battery price, with no extra hardware required.

48V BMS - Protection You Can Rely On Offroad

At 48V, a BMS failure isn't just an inconvenience - it can shut down your entire caravan system in a remote location.

The AllSpark BMS is engineered to give you piece of mind - protecting against high and low temperature (-20°C to +60°C), over-voltage, under-voltage, short circuit, reverse polarity, and over-current.

Automatic cell balancing maintains performance across the full 48V cell stack throughout the battery's life.

48V Efficiency - Run a 5000W Inverter on One Battery

A 48V system's key advantage is the ability to deliver high power output at lower current draw, which means your inverter runs more efficiently and your cabling handles the load more effectively. The AllSpark 100Ah 48V delivers the output to run a 5000W inverter on a single battery - kettle, aircon, induction cooktop, and more, all at the same time.

With A-Grade prismatic cells rated to handle the peak demand without voltage sag, you can run your appliances with confidence.

WHATS IN THE BOX

1 X 48 Volt 100ah powder coated stainless steel cased LiFePO4 battery with vent
M8 terminal bolts (2 length bolts) + nut covers

WARRANTY

7 YEAR MANUFACTURERS REPLACEMENT WARRANTY
30 DAY MONEY BACK GUARANTEE

FEATURES

Water proof IP67 chassis mount case
Powder coated stainless steel construction
Exclusive Solid state BMS designed and developed by Offroad Living
Highest quality premium grade prismatic cells resistance matched, long battery life and no voltage sag with a 20 year design life
Greater than 3000 cycles @ 80% DoD before reaching 85% of original capacity
Power a 5000W Inverter from a SINGLE BATTERY for high power devices including coffee machines, air conditioners, toasters and kettles
Rapid charge
Designed to handle high vibration, dusty and wet environments
7 Year Warranty

SPECIFICATIONS

SKUAS-10048BATLI200500CM

Battery Level Specifications
Capacity (C5)	100Ah
Watt Hours	5120Wh
Rated Voltage	51.2V
Max Charge Voltage	58.4V
Recommended Float	54.4V
Low Voltage Cutoff	40V
Rapid Charge (1C/30min)	100A
Recommended Charge*	30–50A
Charge Profile	CC/CV
Max Inverter Size	5000W
Max Continuous Discharge	200A
Peak Discharge (10s)	500A
Cycles @ 80% DoD^#	> 3200+
Cycles @ 60% DoD	> 4200+
Cycles @ 40% DoD	> 5000+
Optimum Charge Temp	< 45˚C
Operating Temp Range	−20 to +60˚C
Storage Temp Range	−40 to +125˚C
Max Series Voltage	Parallel only
Max Batteries in Parallel	4
Dimensions incl. Handles	550 × 300 × 200mm
Case Material	Powder coated stainless steel
Terminals	2 × M8 Bolted
Weight	51.3kg
IP Rating	IP67
Cell Level Specification
Cell Type	Prismatic
Cell Connection	16S1P
Cell Capacity	3.2V @ 100Ah
Cell Casing	Nickel plated steel
Cell Balancing Target	3.65 ±0.025V
Cell Balance Current	35 ±5mA
OD LV Protection	2.5 ±0.025V
Over Discharge Release	Apply 10.5V+ & 1A+
Over Charge Cutoff	3.65 ±0.025V
OC Detection Delay	1–1.6s
Over Charge Release	3.6 ±0.0625V
OC Release Method	Auto below release voltage
Over Current Det. (1)	220A
OCD Delay (1)	10s
Over Current Det. (2)	500A
OCD Delay (2)	5s
Over Current Release	Remove load — auto
Short Circuit Protection	External short
SC Detection Delay	200–400µS
SC Recovery	Remove load — auto
Internal Resistance	≤20mΩ

Notes* Recommended charge current is for best cell longevity. ^# Cycle life independently laboratory tested at 0.25C discharge and 0.25C charge rate to 5000 cycles at 25°C controlled temperature. Electronic logs recorded during testing show residual capacity in excess of 85% of nameplate C5 capacity after 3000 cycles. In real-world conditions, users will experience a range of temperature, current, and voltage conditions which may affect actual battery performance over its life. Lower depths of discharge and high continuous charge/discharge rates will reduce overall cycle life.

SKU	AS-20012LICMBT	AS-30012LICMBT	AS-40012LICMBT	AS-20024LICMBT	AS-10048BATLI200500CM
Battery Level Specifications
Capacity Amp Hours (C5)	200	300	400	200	100
Watt Hours	2560	3840	5120
Rated Voltage (V)	12.8			25.6	51.2
Max Charge Voltage (V)	14.6			29.2	58.4
Recommended Float Voltage (V)	13.6			27.2	54.4
Low Voltage Cutoff (V)	10			20	40
Rapid Charge Current (1C) for 30 mins (A)	100			100
Recommended Charge Current (A)*	50–80	50–120	80–150	50–80	30–50
Charge Profile	CC/CV
Max Inverter Size (W — per single battery)	2500	3000		4000	5000
Max Continuous Discharge (A)	200	300		200	200
Peak Discharge — 10 secs (A)	500	600		500	500
Charge Cycles @ 80% DoD^# (≥85% residual capacity) @ 60% DoD @ 40% DoD	> 3200+^# > 4200+ > 5000+
Optimum Charge Temperature (˚C)	< 45
Operating Temperature Range (˚C)	−20 to +60
Storage Temperature Range (˚C)	−40 to +125
Max Series Voltage	Parallel connection only — series not permitted
Max Batteries in Parallel	4
Dimensions incl. Handles (mm)	350 × 300 × 200	400 × 300 × 200	550 × 300 × 200
Case Material	Powder coated stainless steel — with threaded vent pipe fitting and cap
Terminals	2 × M8 Bolted Terminals (1 × Red Positive, 1 × Black Negative)
Weight (kg)	25	36.5	51.3
IP Rating	IP67
Cell Level Specification
Cell Type	Prismatic
Cell Connection	4S1P		4S2P	8S1P	16S1P
Cell Capacity	3.2V @ 200Ah	3.2V @ 300Ah	3.2V @ 200Ah		3.2V @ 100Ah
Cell Casing	Nickel plated steel
Cell Balancing Target (V)	3.65 ±0.025
Cell Balance Current (mA)	35 ±5
Cell Over Discharge LV Protection (V)	2.5 ±0.025
Over Discharge Release	Apply charge 10.5V+ & 1A+
Over Charge Cutoff (V)	3.75 ±0.025		3.65 ±0.025	3.75 ±0.025	3.65 ±0.025
Over Charge Detection Delay (secs)	1–1.6
Over Charge Release (V)	3.6 ±0.0625
Over Charge Release Method	Auto below release voltage
Over Current Detection (1) (A)	220	330		220
Over Current Detection Delay (1) (secs)	10
Over Current Detection (2) (A)	500	600		500
Over Current Detection Delay (2) (secs)	5
Over Current Release	Remove load — auto release
Short Circuit Protection	External short
Short Circuit Detection Delay (µS)	200–400
Short Circuit Recovery	Remove load — auto release
Internal Resistance (MOSFET Protection)	≤20mΩ

SKUAS-20012LICMBT

Battery Level Specifications
Capacity (C5)	200Ah
Watt Hours	2560Wh
Rated Voltage	12.8V
Max Charge Voltage	14.6V
Recommended Float	13.6V
Low Voltage Cutoff	10V
Rapid Charge (1C/30min)	100A
Recommended Charge*	50–80A
Charge Profile	CC/CV
Max Inverter Size	2500W
Max Continuous Discharge	200A
Peak Discharge (10s)	500A
Cycles @ 80% DoD^#	> 3200+
Cycles @ 60% DoD	> 4200+
Cycles @ 40% DoD	> 5000+
Optimum Charge Temp	< 45˚C
Operating Temp Range	−20 to +60˚C
Storage Temp Range	−40 to +125˚C
Max Series Voltage	Parallel only
Max Batteries in Parallel	4
Dimensions incl. Handles	350 × 300 × 200mm
Case Material	Powder coated stainless steel
Terminals	2 × M8 Bolted
Weight	25kg
IP Rating	IP67
Cell Level Specification
Cell Type	Prismatic
Cell Connection	4S1P
Cell Capacity	3.2V @ 200Ah
Cell Casing	Nickel plated steel
Cell Balancing Target	3.65 ±0.025V
Cell Balance Current	35 ±5mA
OD LV Protection	2.5 ±0.025V
Over Discharge Release	Apply 10.5V+ & 1A+
Over Charge Cutoff	3.75 ±0.025V
OC Detection Delay	1–1.6s
Over Charge Release	3.6 ±0.0625V
OC Release Method	Auto below release voltage
Over Current Det. (1)	220A
OCD Delay (1)	10s
Over Current Det. (2)	500A
OCD Delay (2)	5s
Over Current Release	Remove load — auto
Short Circuit Protection	External short
SC Detection Delay	200–400µS
SC Recovery	Remove load — auto
Internal Resistance	≤20mΩ

SKUAS-30012LICMBT

Battery Level Specifications
Capacity (C5)	300Ah
Watt Hours	3840Wh
Rated Voltage	12.8V
Max Charge Voltage	14.6V
Recommended Float	13.6V
Low Voltage Cutoff	10V
Rapid Charge (1C/30min)	100A
Recommended Charge*	50–120A
Charge Profile	CC/CV
Max Inverter Size	3000W
Max Continuous Discharge	300A
Peak Discharge (10s)	600A
Cycles @ 80% DoD^#	> 3200+
Cycles @ 60% DoD	> 4200+
Cycles @ 40% DoD	> 5000+
Optimum Charge Temp	< 45˚C
Operating Temp Range	−20 to +60˚C
Storage Temp Range	−40 to +125˚C
Max Series Voltage	Parallel only
Max Batteries in Parallel	4
Dimensions incl. Handles	400 × 300 × 200mm
Case Material	Powder coated stainless steel
Terminals	2 × M8 Bolted
Weight	36.5kg
IP Rating	IP67
Cell Level Specification
Cell Type	Prismatic
Cell Connection	4S1P
Cell Capacity	3.2V @ 300Ah
Cell Casing	Nickel plated steel
Cell Balancing Target	3.65 ±0.025V
Cell Balance Current	35 ±5mA
OD LV Protection	2.5 ±0.025V
Over Discharge Release	Apply 10.5V+ & 1A+
Over Charge Cutoff	3.75 ±0.025V
OC Detection Delay	1–1.6s
Over Charge Release	3.6 ±0.0625V
OC Release Method	Auto below release voltage
Over Current Det. (1)	330A
OCD Delay (1)	10s
Over Current Det. (2)	600A
OCD Delay (2)	5s
Over Current Release	Remove load — auto
Short Circuit Protection	External short
SC Detection Delay	200–400µS
SC Recovery	Remove load — auto
Internal Resistance	≤20mΩ

SKUAS-40012LICMBT

Battery Level Specifications
Capacity (C5)	400Ah
Watt Hours	5120Wh
Rated Voltage	12.8V
Max Charge Voltage	14.6V
Recommended Float	13.6V
Low Voltage Cutoff	10V
Rapid Charge (1C/30min)	100A
Recommended Charge*	80–150A
Charge Profile	CC/CV
Max Inverter Size	3000W
Max Continuous Discharge	300A
Peak Discharge (10s)	600A
Cycles @ 80% DoD^#	> 3200+
Cycles @ 60% DoD	> 4200+
Cycles @ 40% DoD	> 5000+
Optimum Charge Temp	< 45˚C
Operating Temp Range	−20 to +60˚C
Storage Temp Range	−40 to +125˚C
Max Series Voltage	Parallel only
Max Batteries in Parallel	4
Dimensions incl. Handles	550 × 300 × 200mm
Case Material	Powder coated stainless steel
Terminals	2 × M8 Bolted
Weight	51.3kg
IP Rating	IP67
Cell Level Specification
Cell Type	Prismatic
Cell Connection	4S2P
Cell Capacity	3.2V @ 200Ah
Cell Casing	Nickel plated steel
Cell Balancing Target	3.65 ±0.025V
Cell Balance Current	35 ±5mA
OD LV Protection	2.5 ±0.025V
Over Discharge Release	Apply 10.5V+ & 1A+
Over Charge Cutoff	3.65 ±0.025V
OC Detection Delay	1–1.6s
Over Charge Release	3.6 ±0.0625V
OC Release Method	Auto below release voltage
Over Current Det. (1)	330A
OCD Delay (1)	10s
Over Current Det. (2)	600A
OCD Delay (2)	5s
Over Current Release	Remove load — auto
Short Circuit Protection	External short
SC Detection Delay	200–400µS
SC Recovery	Remove load — auto
Internal Resistance	≤20mΩ

SKUAS-20024LICMBT

Battery Level Specifications
Capacity (C5)	200Ah
Watt Hours	5120Wh
Rated Voltage	25.6V
Max Charge Voltage	29.2V
Recommended Float	27.2V
Low Voltage Cutoff	20V
Rapid Charge (1C/30min)	100A
Recommended Charge*	50–80A
Charge Profile	CC/CV
Max Inverter Size	4000W
Max Continuous Discharge	200A
Peak Discharge (10s)	500A
Cycles @ 80% DoD^#	> 3200+
Cycles @ 60% DoD	> 4200+
Cycles @ 40% DoD	> 5000+
Optimum Charge Temp	< 45˚C
Operating Temp Range	−20 to +60˚C
Storage Temp Range	−40 to +125˚C
Max Series Voltage	Parallel only
Max Batteries in Parallel	4
Dimensions incl. Handles	550 × 300 × 200mm
Case Material	Powder coated stainless steel
Terminals	2 × M8 Bolted
Weight	51.3kg
IP Rating	IP67
Cell Level Specification
Cell Type	Prismatic
Cell Connection	8S1P
Cell Capacity	3.2V @ 200Ah
Cell Casing	Nickel plated steel
Cell Balancing Target	3.65 ±0.025V
Cell Balance Current	35 ±5mA
OD LV Protection	2.5 ±0.025V
Over Discharge Release	Apply 10.5V+ & 1A+
Over Charge Cutoff	3.75 ±0.025V
OC Detection Delay	1–1.6s
Over Charge Release	3.6 ±0.0625V
OC Release Method	Auto below release voltage
Over Current Det. (1)	220A
OCD Delay (1)	10s
Over Current Det. (2)	500A
OCD Delay (2)	5s
Over Current Release	Remove load — auto
Short Circuit Protection	External short
SC Detection Delay	200–400µS
SC Recovery	Remove load — auto
Internal Resistance	≤20mΩ

SKUAS-10048BATLI200500CM

Battery Level Specifications
Capacity (C5)	100Ah
Watt Hours	5120Wh
Rated Voltage	51.2V
Max Charge Voltage	58.4V
Recommended Float	54.4V
Low Voltage Cutoff	40V
Rapid Charge (1C/30min)	100A
Recommended Charge*	30–50A
Charge Profile	CC/CV
Max Inverter Size	5000W
Max Continuous Discharge	200A
Peak Discharge (10s)	500A
Cycles @ 80% DoD^#	> 3200+
Cycles @ 60% DoD	> 4200+
Cycles @ 40% DoD	> 5000+
Optimum Charge Temp	< 45˚C
Operating Temp Range	−20 to +60˚C
Storage Temp Range	−40 to +125˚C
Max Series Voltage	Parallel only
Max Batteries in Parallel	4
Dimensions incl. Handles	550 × 300 × 200mm
Case Material	Powder coated stainless steel
Terminals	2 × M8 Bolted
Weight	51.3kg
IP Rating	IP67
Cell Level Specification
Cell Type	Prismatic
Cell Connection	16S1P
Cell Capacity	3.2V @ 100Ah
Cell Casing	Nickel plated steel
Cell Balancing Target	3.65 ±0.025V
Cell Balance Current	35 ±5mA
OD LV Protection	2.5 ±0.025V
Over Discharge Release	Apply 10.5V+ & 1A+
Over Charge Cutoff	3.65 ±0.025V
OC Detection Delay	1–1.6s
Over Charge Release	3.6 ±0.0625V
OC Release Method	Auto below release voltage
Over Current Det. (1)	220A
OCD Delay (1)	10s
Over Current Det. (2)	500A
OCD Delay (2)	5s
Over Current Release	Remove load — auto
Short Circuit Protection	External short
SC Detection Delay	200–400µS
SC Recovery	Remove load — auto
Internal Resistance	≤20mΩ

FAQ's

How do I store my AllSpark LiFePO4 battery?

If you plan to have your batteries in storage for extended periods of time, disconnect/isolate any loads or parasitic power consumers. Charge/Discharge battery to 80% State of Charge. Battery can then be stored for up to 12 months. If storing for longer, re-charge to 80% SoC every 6-12 months.

What do I do if my AllSpark LiFePO4 battery goes flat?

If you discharge your battery to 40.0V, it will go into Low voltage protection mode. This will disconnect all loads and the battery voltage will show as 0V. When in LV protection, the BMS disconnects power to the battery terminals. To release it from protection, you must provide 42V+ and 1A to the battery to "Wake up" the BMS. Special note - many DCDC chargers and Solar controllers cannot wake up a LiFePO4 battery from LV protection if they don't have a power supply mode. To overcome this, most AC to DC chargers have a power supply mode or you can use a portable jump starter pack or any other battery connected in parallel for a few secs to wake it up. Then you normal chargers can take over the charging funtion.

Can I link another 100ah to give me 200ah? Or more?

Yes - these batteries can be connected in parallel using the second connector to double your amp hour capacity. The maximum that can be connected in parallel is 4 batteries. The batteries should be within a few months of each other in age to ensure optimal performance and longevity.

100Ah 48V Lithium Battery Waterproof Chassis Mount IP67

Name: 100Ah 48V Lithium Battery Waterproof Chassis Mount IP67
Brand: wellness-welten.net
SKU: 66275033650
Price: 2169.50 USD
Availability: InStock
Rating: 4.7506 (399 reviews)