Permatex ®s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute. This leak-proof, elastomeric "Formed-in-place" material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Permatex 34328 Attributes

• Used For: Valve Covers/ Water Pump/ Intake Manifold End Seals And Thermostat Housings
• Length (FT): Not Applicable
• Width (IN): Not Applicable
• Temperature Rating: -65 Degree Fahrenheit To 500 Degree Fahrenheit

Permatex 34328 Features & Benefits

• Designed To Perform Under Higher Torque Loads Associated With Engines Having Closely Spaced Bolt Patterns
• Sensor-Safe, Non-Corrosive, RTV Silicone
• Protects Against Leaks Caused By Vibration And Thermal Expansion
• Meets Performance Specs Of OE Silicone Gaskets
• Quickly Returns Vehicle To Service In Just 90 Minute
• No Supplier Warranty

Permatex 34328 Technical Bulletins

• 34328.pdf
• 34328 (1).pdf

The Right Stuff® Grey Instant 90 Minute Gasket Maker - 5oz

Quickly outperforms pre-cut gaskets by providing superior adhesion to rigid joints that experience high torque loads. A premium professional grade gasket maker for today’s fast-paced professional garage and heavy DIY’ers. Temperature range -65°F to 500°F Intermittent.

Look for other Permatex The Right Stuff® branded Gasket Makers that return vehicles to service in a matter of minutes.

Directions:

1. For best results, surfaces should be clean and dry.
2. Cut nozzle and apply a continuous 1/16″ to 1/4″ (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
3. Let dry for one hour then tighten to torque specifications.
4. Allow 90 minutes before filling with fluids or returning to service.
5. Replace cap after use.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.