Shopping security
Imagine navigating choppy waters with unwavering confidence, where your autopilot responds instantly to helm commands without lag or hesitation. The Raymarine Type 3 24V pumpset steps in as the powerhouse behind this seamless performance, designed specifically for hydraulically steered boats. This reversing hydraulic pump delivers robust power to steering rams between 21 and 30.5 cubic inches, ensuring smooth, reliable operation even under demanding conditions.
Crafted for marine enthusiasts who demand durability, it integrates effortlessly with Raymarine's 400 and SPX10 Series corepacks, transforming your autopilot into a trusted ally on long passages or weekend cruises alike.
These attributes aren't just specs—they translate to real-world reliability, where every turn counts.
In the unpredictable marine environment, where salt spray, humidity, and heavy loads test equipment limits, this pumpset shines with its rugged construction. It reduces steering effort dramatically, allowing skippers to focus on the horizon rather than the wheel. Boat owners report fewer hydraulic leaks and longer service intervals compared to lesser pumps, thanks to precision-engineered seals and corrosion-resistant materials.
For sailboats tacking through swells or powerboats slicing wakes at speed, it maintains lock-to-lock times that feel responsive, enhancing safety during night watches or in crowded anchorages. Pair it with your existing Raymarine ecosystem, and you'll unlock autopilot efficiency that feels almost intuitive.
Fitting this pumpset into your hydraulic system is straightforward for those familiar with marine plumbing. Position it in a dry, accessible spot for floor mounting, ensuring fluid lines route away from heat sources. Prime the system thoroughly before first use to avoid air pockets that could cause erratic steering.
It's compatible with a broad spectrum of hydraulically steered boats, from mid-size cruisers to performance yachts. Always cross-check your ram displacement against the 21-30.5 cubic inch sweet spot for optimal flow rates—over- or under-sizing leads to sluggish response or premature wear.
"Swapped in this pumpset on my 42-footer, and the autopilot now tracks like it's on rails. No more fighting the wheel in beam seas." – Experienced offshore sailor
Keep it humming with simple routines: Inspect hydraulic fluid levels monthly, using only manufacturer-approved types to prevent seal degradation. Flush the system annually if operating in silty waters. Listen for unusual whines during operation—they often signal cavitation, fixable with proper bleeding.
Over years of service, this pumpset proves its worth by outlasting competitors in endurance tests, thanks to its heavy-duty motor and reinforced internals built for the sea's toughest challenges.
Whether you're outfitting a coastal fishing rig, a bluewater explorer, or a sportfishing battlewagon, this 24V Type 3 pumpset adapts to the task. It excels in setups where hydraulic rams handle substantial loads, delivering the torque for quick corrections without overheating. Sailors appreciate its quiet operation during light-air maneuvers, while powerboaters value the rapid response in high-speed turns.
It's ideal for hydraulically steered boats with rams sized 21 to 30.5 cubic inches, such as mid-to-large sailboats, cruisers, and yachts where precise autopilot control is essential.
This high pressure ensures forceful, quick movements of the steering ram, reducing lock-to-lock times and improving responsiveness in rough seas or high-speed scenarios.
It's specifically designed for the 400 and SPX10 Series corepacks, ensuring plug-and-play integration with these hydraulic autopilot systems.
Rated for 24V systems, which provide stable power for larger vessels, preventing performance dips common in 12V setups under load.
Use the floor-mount configuration in a ventilated, protected area below deck, securing it firmly to minimize vibration and ensure longevity.
Yes, its reversing design allows bidirectional hydraulic flow, enabling seamless port-to-starboard steering corrections just like manual input.
Regular fluid checks, annual flushes, and bleeding air from lines will maintain peak efficiency and prevent common hydraulic issues.
Reversing hydraulic pump for use with steering systems equipped with 21-30.5 cubic inch (350-500 cc)hydraulic steering rams. Compatible with 400 and SPX10 Series corepacks.
Ships within 48 hours · Estimated delivery Sep 4 - Sep 9
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order