For extraordinary cleaning against limescale, mineral residues and old acid rain stains or for removing old protective coatings:

1. Wait until surfaces are cool and apply away from the sun.
2. It is recommended to prepare the surface to be treated with 100% Scale through a prewash phase with SP1 Prewash and a wash phase with DS Scale.
3. Use a microfiber applicator and spread the product with light pressure and vertical and horizontal movements, leaving it to act for a couple of minutes.
4. Proceed to rinse with water, even at high pressure.

For ordinary cleaning of limescale and mineral residues and recent acid rain:

1. Wait until surfaces are cool and apply away from the sun.
2. Spray the product diluted 1:5, treating one panel at a time, leaving it to act for a couple of minutes.
3. For a more intense action: use a soft bristle brush and spread the product with vertical and horizontal movements.
4. Proceed to rinse with water, even at high pressure.

For extraordinary cleaning of windows and headlights:

1. Wait until surfaces are cool and apply away from the sun.
2. It is recommended to prepare the surface to be treated with 100% Scale through a prewash phase with SP1 Prewash and a wash phase with DS Scale.
3. Spread the product onto the glass with a microfiber applicator evenly and allow it to work for a couple of minutes.
4. For more intense action: use a medium bristle brush or the white side of Micron Scrub and spread the product with vertical and horizontal movements.
5. Wait a couple of minutes and rinse.

Extraordinary cleaning: use the product pure.

For ordinary cleaning of limescale, mineral residues and recent acid rain: dilution can be up to 1:5, i.e. use 160 ml of product and fill the remaining part with water (840 ml) to obtain 1 L of ready-to-use solution.

Warnings:

We advise not to apply on hot surfaces or in the sun and not to allow the product to dry out or remain on glass or other surfaces for a long time.

We do not recommend using the product pure on previously applied protective treatments whose resistance is unknown, as it is a strong decontaminating treatment. In such cases we recommend a dilution of 1:5 or more.

Do not use pure on unpainted or acid-sensitive surfaces (i.e. direct gloss varnishes), even if the product contains anti-corrosives.

If in doubt or on particularly sensitive surfaces, it is always recommended to test the application on a small hidden part before use.

Always refer to the MSDS and the precautions and instructions on the label.

We recommend using the product on surfaces previously cleaned with SP1 Prewash and DS Scale.

SKU: 102574