Why Choose 100mm Square Megaflex Stick Down Floor Waste

Use 100mm Square Megaflex Stick Down Floor Waste for high-velocity drainage in wet rooms where a low-profile, flush floor waste is required. This product is a stick-down floor waste solution that pairs a solid brass grate with an ABS plastic flange to suit slab-on-grade and screeded substrates in compliance with AS/NZS 3500.

100mm Square Megaflex Stick Down Floor Waste Common Uses

This product is selected for commercial wet rooms and high-flow areas where membrane-compatible sealing and reliable water evacuation are critical.

• Large-area wet rooms with cement screed and waterproofing membrane systems
• Shallow commercial screeds where a low-profile, flush installation is required
• Environments needing chrome-plated solid brass grate for superior corrosion resistance

Where 100mm Square Megaflex Stick Down Floor Waste Performs Best

Performs reliably on tiled, vinyl, and screeded surfaces when installed with a compatible waterproofing membrane and the specified bonding primer for cement screed. Avoid high-temperature waste water systems above 60°C.

Coverage, Skin Time & Cure

Yield and coverage are dependent on substrate and primer selection; plan tooling off and bonding sequence to align with membrane cure and drain positioning.

• Use with a waterproofing membrane for full effectiveness
• Cement screed applications require bonding primer for secure adhesion
• Restrict operation to an ambient range of 5°C to 60°C

Surface Prep & Application

Prepare the substrate to ensure a clean, sound surface free of contaminants that could compromise the bond between the ABS flange and the waterproofing layer.

1. Clean and prime the substrate as required, especially for cement screed
2. Position the 100mm Square Megaflex Stick Down Floor Waste to align with the drainage pipe fitting
3. Apply the stick-down method to secure the flange, ensuring a flat, flush termination
4. Verify the 100mm outlet provides high-velocity evacuation without pooling

Best Practices for Using 100mm Square Megaflex Stick Down Floor Waste

Integrate the system with compatible waterproofing membranes and use the required bonding primer to prevent leak paths at the drainage interface.

• Pair with a waterproofing membrane for membrane-compatible sealing
• Apply a bonding primer on cement screed before installing the ABS flange
• Confirm wastewater temperature remains within 5°C to 60°C to protect materials
• Use chrome-plated solid brass grate to reduce corrosion risk in high-moisture areas

Handling & Storage

Handle with standard PPE and store in conditions that protect the chrome finish and ABS components from UV exposure and temperature extremes.

• Store at 5°C to 25°C, protected from UV exposure
• Wear appropriate PPE when handling and tooling the product
• Keep away from incompatible materials that could affect the ABS flange bond
• Dispose of waste in accordance with local regulations