Lift the toughest organic stains from your hardscape with the Techniseal Organic Stain Remover. This biodegradable, concentrated cleaner attacks moss, mildew, dead-leaf tannin, wine, blood, and non-greasy food stains on concrete pavers, natural stone, brick, and stamped or poured concrete — without damaging or discoloring the substrate. Safe for both bare and sealed surfaces, and engineered to require minimum scrubbing and rinse easily with water.

Product Code: 60100007 · Available in: 25 oz concentrate bottle

What It Removes

• Moss and mildew — the green and black biological growth that takes over shaded patios and walkways
• Dead-leaf tannin stains — the rust-brown silhouettes left behind after autumn leaves sit too long
• Wine, blood, and non-greasy food stains — entertainment-area accidents that ordinary cleaners can’t shift
• General organic discoloration from atmospheric biological contamination

Specifications

• Type: Concentrated organic stain remover — biodegradable
• Form: Liquid concentrate — dilute per label directions
• Suitable for: Concrete pavers, natural stone, brick, concrete slabs, interior concrete, interlocking pavers, poured concrete, stamped concrete, wet-cast pavers
• Bare or Sealed: Safe on both bare and sealed surfaces
• Application Tools: Pump sprayer or watering can; soft bristle brush for light agitation; low-pressure water rinse
• Coverage: Apply as needed — spot-treatment product, coverage varies by stain depth and dilution
• Storage: Cool area, cap firmly in place
• Eco profile: Biodegradable, environmentally-friendly

Why Techniseal Organic Stain Remover?

• Won’t damage substrate: formulated to lift organic stains without etching or discoloring concrete, stone, or brick
• Minimum scrubbing: the chemistry does the work — saves crew time on big patio jobs
• Easy rinse: washes clean with water; no residue to streak the finish
• Bare or sealed: safe across the entire paver maintenance lifecycle, before or after sealing
• Biodegradable: safer near vegetation, irrigation, and waterways than harsh-acid cleaners

Application

1. Test in an inconspicuous area first to confirm desired results.
2. Pre-wet adjacent landscaping with clean water to dilute any runoff.
3. Apply directly to the stained area per label dilution. Allow to dwell.
4. Light scrub with a soft bristle brush if needed — this product is designed to require minimal scrubbing.
5. Rinse thoroughly with clean water until all residue is gone. Re-rinse adjacent vegetation.
6. Repeat on stubborn stains. Allow surface to dry fully before resealing if applicable.

Tips

• For pre-seal cleaning of an entire patio, use Techniseal Paver Prep instead — this product is best for spot-treatment of organic stains
• Wear gloves when applying; product is biodegradable but still a concentrated cleaner
• For full chemical, application, and safety information, refer to Techniseal’s technical data sheet from your dealer