A small windshield crack can spread across the glass in just hours of driving. Over 70% of drivers end up replacing their entire windshield due to delayed repair.

The Professional Windshield Crack Repair Kit lets you fix minor chips and cracks at home in just 20 minutes - before they become dangerous or too expensive to repair.

Key Benefits

• Vacuum-assisted sealing: Quickly removes trapped air from cracks to allow deeper resin penetration and stronger adhesion.
• Strong resin bond: Imported repair fluid provides up to 20PA shear strength for long-lasting windshield protection.
• Enhanced injection system: Rubber-tipped pressure head creates a tight seal and directs resin exactly into the crack.
• Quick DIY repair: Simple, tool-free setup lets any driver fix minor damage in just 20 minutes at home.
• Safe to apply: Use safely with gloves and glasses; avoid direct sunlight during application for best results.
• Best for fresh damage: Works most effectively on new cracks free of dust, oil, or moisture.

Perfect For

• Car owners with fresh star, horseshoe, or bullseye windshield cracks under 1 inch
• DIY users looking to repair minor windshield damage without visiting a repair shop
• Emergency fixes to stop cracks from spreading and worsening over time
• Drivers in gravel-heavy roads or construction zones prone to windshield impacts
• Not suitable for: cracks over 1 inch, long or deep cracks, inner-layer glass damage, or old, contaminated breakage

Specifications

• Product model: WRK-15004
• Item type: Fillers, Adhesives & Sealants
• Material: Windshield repair resin + plastic applicator system
• External certification: CE
• Package size: 220 x 110 x 25 mm
• Packing weight: 40g
• Recommended temperature range for application: 60℉–90℉ (15℃–32℃)
• Usage notes: Avoid use in direct sunlight; surface must be clean and dry before repair

Package includes

• 1 × repair glue
• 1 × repair tool with suction cup
• 5 × maintenance film
• 1 × razor blade with handle
• 1 × user manual

How to Use

1. Clean the damaged area
   Gently wipe the cracked spot with a clean cloth. Make sure it's dry and free from dust, oil, or debris.
2. Avoid direct sunlight
   Move your vehicle to a shaded area. The ideal temperature for repair is 60℉–90℉ (15℃–32℃).
3. Seal the area with tape (optional but recommended)
   If the crack is fresh, cover it temporarily with transparent adhesive tape to prevent moisture or dirt before using the kit.
4. Mount the repair device
   Center the suction base directly over the crack. Secure it in place by pressing it firmly onto the glass.
5. Inject the repair resin
   Screw the injector into the mount. Pour the repair resin into the injector, then tighten to create pressure and push resin into the crack.
6. Use vacuum/pressure cycle (if applicable)
   Follow the included instructions to alternate vacuum and pressure for better resin penetration (if your kit supports this function).
7. Apply curing film
   Once resin has filled the crack, place a curing film over the area.
8. Let it cure under sunlight (after application)
   Move the car into sunlight and let it sit for 15–20 minutes until the resin hardens completely.
9. Remove excess resin
   Gently scrape off any remaining resin with the provided razor blade.