Part Number

0 265 950 056 - You must match this exactly!

• EBCM is free and clear of rust or corrosion.
  

Fitment

You must match your part number exactly for proper fitment. If you do not match this you more than likely will get a no communication situation.
• EBCM will require initialization to your vehicle and IS NOT plug and play
• Prior to purchase please verify your wheel speed sensors are good or have been replaced and be sure the pick up ring is cleaned up as well. Also make sure your wiring harness has no breaks all of these situations can set trouble codes. Please have your abs pump tested prior to install. If you have questions about your codes please email us prior to purchase.

Tech Notes

Module has been tested by our experienced technical staff! Some of those tests are listed below:
• Module powered up as expected and has communication
• Wheel speed sensors circuits good
• Precharge Pump circuit tests good
• Brake Switch input good
• DSC and HBC Switch input good
• Fluid Pressure sensor circuit good

Install Notes

Please follow below for proper installation of module:
• Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
• Disconnect and remove module to be replaced. Make sure connector harness is clean and there are no broken wires.
• Install and connect the replacement module.
• Connect the negative terminal of the battery. Module requires programming to the vehicle at this point.

Warranty

• This EBCM carries a 3 month warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.