The SkyRail+ Cage Attached Projector Mount eliminates the most common headache of indoor simulator builds: routing a projector to your ceiling. Instead of drilling joists or fighting a vaulted, sloped, or finished ceiling, the SkyRail+ attaches the projector directly to your golf simulator enclosure frame, putting placement and alignment in your hands at the cage level.

At the heart of the kit is a sliding rail that lets the projector glide forward and back up to 29 inches, with placement ranging from 3 inches to 30 inches outside the front of your cage. That range covers virtually every short-throw simulator projector on the market, so you can dial in the perfect throw distance to fill your screen edge to edge without re-mounting the unit. Two SkyBridge Span Kits are included to bridge the rail across your enclosure's top bars, securing to 1 inch and 1.5 inch EMT poles in any standard simulator cage build up to 10 feet deep by 20 feet wide.

The SkyRail+ ships fully assembled and uses a patented design that is compatible with Super Bay, DIY Bay, Studio Bay, Flex Bay, and Generic 1 inch EMT cage styles. It is not compatible with the MicroBay system. Once installed, the rails make image alignment a 30 second job instead of an afternoon project.

What's Included:

• SkyRail+ Sliding Projector Mount, Fully Assembled
• (2) SkyBridge Span Kits for Cage Attachment

Features

Attaches Directly to Your Simulator Enclosure
The SkyRail+ mounts to the frame of your golf simulator cage, eliminating ceiling installation, drilling, and overhead cable routing.

29 Inch Sliding Range for Perfect Throw Distance
The rail allows the projector to glide up to 29 inches, placing it anywhere from 3 inches to 30 inches outside the front of your enclosure to perfectly fill your impact screen.

Works With Vaulted, Sloped, and Finished Ceilings
Because the mount lives on the cage rather than the ceiling, ceiling height, pitch, and finish stop being constraints on where your projector lands.

Includes Two SkyBridge Span Kits
Each kit secures the SkyRail across your enclosure's top bars and clamps cleanly to the 1 inch and 1.5 inch EMT poles used in most simulator builds.

Compatible With Most Enclosed Simulator Cages
Fits Super Bay, DIY Bay, Studio Bay, Flex Bay, and Generic 1 inch EMT cage builds up to 20 feet wide by 10 feet deep. Not compatible with the MicroBay system.

Ships Fully Assembled
The patented design arrives ready to mount, so your setup time is measured in minutes, not hours.

What's Included

Included with your purchase:

• SkyRail+ Sliding Projector Mount, Fully Assembled
• (2) SkyBridge Span Kits
• Mounting Hardware for 1 Inch to 1.5 Inch EMT Poles

Specifications

• Mount Type: Cage / Enclosure Frame Attached, Sliding Rail
• Sliding Adjustment Range: Up to 29 Inches
• Projector Placement Range: 3 Inches to 30 Inches Outside Cage Front
• Pole Compatibility: 1 Inch to 1.5 Inch EMT (Outer Circumference)
• Maximum Cage Footprint: Up to 20 Feet Wide by 10 Feet Deep
• Compatible Bay Styles: Super Bay, DIY Bay, Studio Bay, Flex Bay, Generic 1 Inch EMT
• Not Compatible With: MicroBay System
• Assembly: Ships Fully Assembled
• Included Hardware: Two SkyBridge Span Kits

FAQ

Q: Why mount the projector to the cage instead of the ceiling?
A: Cage mounting eliminates the need to drill into joists, route cables through ceilings, or work around vaulted or sloped ceilings. It also makes the projector easy to re-aim and slide for screen fill without ladder work.

Q: Will the SkyRail+ work with my projector?
A: The SkyRail+ is designed to work with most short throw and ultra short throw projectors used in golf simulators. As long as your projector fits within the rail's mounting plate and weight tolerance, the 29 inch sliding range will let you dial in the correct throw distance.

Q: What size cage does it fit?
A: It fits enclosures built with 1 inch to 1.5 inch EMT poles, up to 20 feet wide by 10 feet deep. Choose the size variant that matches your enclosure footprint.

Q: Which bay styles does the SkyRail+ work with?
A: It is compatible with Super Bay, DIY Bay, Studio Bay, Flex Bay, and Generic 1 inch EMT builds. It is not compatible with the MicroBay system.

Q: Does it come assembled?
A: Yes. The SkyRail+ ships fully assembled with the patented sliding mechanism in place. You just need to mount it to your enclosure using the two included SkyBridge Span Kits.

Q: How far from the screen can the projector be placed?
A: The mount supports projector placement from 3 inches to 30 inches outside the front of your cage, with up to 29 inches of slide adjustment between those positions.