Full contact rear camber/rear toe adjustment shim Toyota rear torsion beam axle for alignment adjustment 7 types, 2 each, total 14 pieces Toyota FF vehicles: Alphard/Vellfire (H20 series), Estima (50 series), Sienna (2011~) 2014) Japanese installation manual included

This Toyota rear shim adjusts the wheel alignment of rear torsion beam coil springs such as Alphard/Vellfire. You can obtain the desired amount of change by combining shims. You can stack up to two shims on one side. *Do not change more than 1.00°/1°0′. *Installation to 4WD is limited to adjustment to the extent that the pulse ring does not touch. Cannot be used in case of contact. Compatible models Toyota: Alphard/Vellfire (H20 series), Estima (50 series), Sienna (2011-2016) Set contents 7 types of shims listed below, 2 pieces each set, 14 pieces 71621: Rear toe variation: ±0.10°71622 : Rear toe change: ±0.20°71623: Rear toe change: ±0.30°71624: Rear toe change: ±0.40°71625: Rear toe change: ±0.50°71631: Rear camber change: ±0.25°71632: Rear camber change Amount: ±0.50° Precautions for use We cannot provide any support or answers regarding vehicle inspections. Please check with the relevant testing laboratory. Before starting work, be sure to check that the product is compatible with the vehicle, that there are no missing parts, and that the bolts that secure the hub bearing are the appropriate length. Please also check the car manufacturer's maintenance manual. Please do not use this product if you are concerned about any abnormal noise. The desired values ​​may not be achieved due to dirt on the mounting surface, incorrect torque, assembly errors, and individual differences. Do not change toe or camber by more than 1°. Installation on 4WD is limited to adjustment to the extent that the pulse ring does not touch. Cannot be used in case of contact. This part must be installed at your own risk by someone with the necessary knowledge and skills, using appropriate and safe tools and equipment. Improper installation may result in loss of vehicle control, personal injury, and vehicle damage. We are not responsible for any injuries, accidents, or malfunctions that may occur during the installation or use of this product. After installation, 4 wheel alignment/toe adjustment is required. Safety Warning We cannot provide any assistance or answers regarding vehicle inspections. Please check with the relevant testing laboratory. Before starting work, be sure to check that the product is compatible with the vehicle, that there are no missing parts, and that the bolts that secure the hub bearing are the appropriate length. Please also check the car manufacturer's maintenance manual. Please do not use this product if you are concerned about any abnormal noise. The desired values ​​may not be achieved due to dirt on the mounting surface, incorrect torque, assembly errors, and individual differences. Do not change toe or camber by more than 1°. Installation on 4WD is limited to adjustment to the extent that the pulse ring does not touch. Cannot be used in case of contact. This part must be installed at your own risk by someone with the necessary knowledge and skills, using appropriate and safe tools and equipment. Improper installation may result in loss of vehicle control, personal injury, and vehicle damage. We are not responsible for any injuries, accidents, or malfunctions that may occur during the installation or use of this product. After installation, 4 wheel alignment/toe adjustment is required. Read more


Manufacturer: ‎Specialty Products Company
Brand: ‎Specialty Products Company
Model name: 71600
Packing size: ‎23.4 x 17.6 x 5.7 cm; 483.99 g
Product model number: 71600
Original product number: 71600
Product weight: 484 g