Gedore (Series 8463-10) DREMOMETER DZ 22Z Torque Wrench, 140 - 620 Nm - GD 7703020

Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate. Working accuracy - 3 % tolerance of scale set torque. The specification of the standard ( /- 4 %) is exceeded. Lightweight yet robust (as the housing is made of an aluminum alloy) and resilient, very workshop-friendly. Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket). Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwise, inaccuracies can evolve (except for model DXZ where the DREMOMETER has been calibrated and adjusted using the extension tube). Operation only with end fittings with standardized depth gauges, otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original Gedore accessories. Large drive cross-section transfers maximum torques. Extremely low wear attributable to reduced forces in the lever mechanism. Forged lever chain from our own quality forge. Maximum precision even when subjected to extreme continuous use. Long life cycles and tool lives. Easy operation - fast and safe torque tightening. Easy adjustment thanks to attractive adjusting button secured against loss at the end of the handle. With certificate acc. to DIN EN ISO 6789, traceable via in-house DAkkS laboratory to national standards.

Specifications:

• Length (L, L1): 846mm
• Width: 45mm
• Scale Divisions: 10 N.m / 10 lbf.ft
• Range of Work / Measurement (Min/Max): 140 - 620 N.m
• Depth Gauge (C, L): 56mm
• Drive Connector Pin: 22mm
• Distance From Middle of Handgrip to Pivot Point: 767.5mm
• Distance From Middle of Screw to Pivot Point: 49mm
• Distance From Housing to Drive: 17.5mm
• Length: 846mm
• Weight: 3 kg