Roberlo 68541 Hardener E-6325 (Series Epoxi E-63) — 1L

Hardener E-6325 is an epoxy hardener from Roberlo’s Disolac industrial line, intended for use in industrial epoxy coating systems. This listing corresponds to Art. No. 68541 in 1 liter format.

Key Features

• Epoxy hardener for industrial epoxy systems
• Part of Series Epoxi E-63 (Disolac system)
• Professional / industrial use (per manufacturer safety documentation)
• Available sizes on APS: 1L and 4L (variant)

Specifications

How to Use (System-Based Guidance)

E-6325 is used as the hardener component in an epoxy system. For the correct mixing ratio, pot life, application method, and drying/cure, always follow the Technical Data Sheet (TDS) of the epoxy product you are using within the system.

• Step 1: Confirm the epoxy product specifies E-6325 as the required hardener.
• Step 2: Mix strictly per the epoxy product’s TDS until homogeneous.
• Step 3: Apply as indicated by the epoxy product’s system instructions and environmental limits.
• Step 4: Clean equipment immediately after use and store containers tightly closed.

Safety & Handling (SDS Highlights)

This product is intended for professional/industrial users. Review the Safety Data Sheet (SDS) before use and follow workplace safety procedures.

• Flammable liquid and vapour (H226)
• Causes skin irritation (H315)
• May cause an allergic skin reaction (H317)
• Causes serious eye damage (H318)
• May cause respiratory irritation (H335)
• May cause organ damage through prolonged or repeated exposure (H373)
• Harmful to aquatic life with long lasting effects (H412)