Agilent N9344C 20 GHz Handheld Spectrum Analyzer (Pre-Owned)

Key Features At A Glance

• Frequency range 1 MHz to 20 GHz, tunable to 9 kHz, AC-coupled RF input
• Handheld field-ready design, 3.2 kg, with a 6.5-inch 640×480 TFT color display
• Battery operation up to 3.5 hours (preamp on, tracking generator off); ~3-hour recharge
• Displayed average noise level to -137 dBm typ. -142 dBm (10 MHz–3 GHz, preamp off)
• USB host, USB device, and 10 Base-T LAN interfaces for connectivity and data transfer
• Resolution bandwidths 10 Hz to 3 MHz in 1-3-10 sequence; 461 sweep points, 4 traces
• Maximum safe input +30 dBm average continuous and ±50 VDC; Type-N 50 Ω RF input
• Licensed options add tracking generator, RF preamplifier, GPS tagging, and modulation analysis

The Agilent N9344C is a handheld spectrum analyzer (HSA) covering a frequency range of 1 MHz to 20 GHz, tunable down to 9 kHz, with an AC-coupled RF input. It is built for engineers and technicians making measurements in the field, pairing benchtop-class measurement performance with a portable, field-ready form factor so work can be carried out—and trusted—on site, even in tough field environments.

A spectrum analyzer measures signal amplitude across a range of frequencies, revealing the spectral content of an RF or microwave signal. The N9344C is designed specifically for operating in demanding field environments, where its measurement performance gives confidence that the job has been done right. An optional task planner (Option TPN) lets users automate routine measurements to save time and ensure consistent, repeatable results, capture measurement data, and generate reports.

ValueTronics stocks and holds its own inventory in a 20,000-square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer. Serving the test-and-measurement market since 1992, we back our equipment with knowledgeable specialists who understand the instruments we sell.

Brand Heritage

Agilent Technologies began as the test-and-measurement business of Hewlett-Packard, which spun that business off as Agilent Technologies in 1999. Agilent's electronic measurement business was subsequently established as Keysight Technologies in 2014.

Product Core & Specifications

Important: Maximum safe input level: +30 dBm average continuous power (3 minutes maximum, input attenuator setting ≥ 20 dB); ±50 VDC maximum.

Important: To meet published specifications the analyzer must be within its calibration cycle and turned on for at least 30 minutes (warm-up time).

Important: Option PWM (High accuracy power measurement) requires an Agilent U2000 Series USB power sensor; the dynamic range (-60 to +44 dBm) and frequency range (9 kHz to 24 GHz) are sensor dependent. The power sensor is not part of the analyzer.

Important: An external GPS antenna (N934xC-GPA) is offered as an optional accessory for use with the built-in GPS receiver (Option GPS) via the SMA-F external GPS antenna connector.

About this Pre-Owned unit

This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.

• Warranty included
• Functional verification included
• Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
• Note that unnecessary accessories may not be included (contact Test Architect to confirm).

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.