04692119 - This TIPM will work for all software codes AA through AR as long as your part number is 04692119.

TIPM will arrive plug n play with instructions. Instructions for plug n play generally take less than 3 minutes to complete after the TIPM has been installed. NO trip to your dealer or local mechanic! You must install with the negative battery terminal removed and after install you will need to clear the stored codes, drive your truck for 5-10 miles then clear the stored codes one more time. This will fully marry the Fuse Box to the vehicle.

There are multiple internal board layouts. You must match your part number to ensure proper fitment.
• 2006 to 2009 Dodge Ram truck models with the same part number.
• You may need to swap some fuses and relays as necessary from your fuse box into this unit prior to install however we normally send them out complete.
• These fuse boxes require programming however your TIPM will arrive plug and play with instructions! No trip to the dealer!

Fuse Box has been tested and/or repaired by our experienced electronics techs! Some of those tests/repairs are listed below:
• Fuse box opened and there is no corrosion. The common failure points on the circuit board have been refurbished.
• All traces good or repaired as necessary
• No broken or corroded pins
• Mounting points are intact but may have a slight amount of plastic chipped off. Please review the pictures prior to purchase.
• We test over 16 signal outputs including but not limited to the following: Fuel Pump / ASD output / L and R low and high beams / L and R turn signal / Horn / Rear Defrost / Windshield wipers / Reverse and Park lamps / HVAC blower output / Transmission power output and more!!
• Lid is "not" included but you can reuse your lid, an easy swap.