Additional Features:

• Frequency Range: 200 MHz to 1 GHz
• Power (CW): 500 Watts
• Average Gain: 6 dBi
• Average VSWR: 1.2: 1
• Polarization: Linear
• Impedance: 50 Ω
• Connector: N type (f)
• Width: 29 in / 75 cm
• Length: 29 in / 75 cm
• Weight: 5 lb / 2.2 kg
• Transmit & Receive Capabilities emissions/immunity applications
• Individual Calibration Included per ANSI C63.5 with NIST traceability
• Three-year Standard Warranty

The ALP-100 is a broadband, linearly polarized Log Periodic Dipole Array (LPDA) Antenna, operating over the frequency range of 200 MHz to 1 GHz. This antenna is geared specifically for high power applications up to 500 watts.

Construction

The ALP-100 is designed to be extremely durable, making it an ideal choice for daily use in laboratory environments, both indoors and outdoors, and even under continuous exposure to extreme weather conditions. The antenna is constructed using a heavy gauge, high grade, corrosion resistant aluminum.

Calibration

Each antenna is individually calibrated per ANSI C63.5 with NIST traceability. The calibration data and certificate is provided. Recognized ISO 17025 accredited calibration is also available upon request.

Application

The ALP-100 Power Log Periodic Antenna is primarily intended for use as a transmitting antenna for establishing radiated RF fields for product immunity tests, and is capable of handling power levels up to 500 Watts.

The ALP-100 is also suitable for use as an EMI test antenna for qualification-level regulatory compliance measurements (FCC, CE, RTCA DO-160, FDA, SAE Automotive, etc.).

In addition, a pair of ALP-100 Log Periodic Antennas can be used in lieu of dipole antennas for Normalized Site Attenuation (NSA) calibrations of Open Area Test Sites (OATS) or Semi-Anechoic Chambers (SAC); thereby avoiding the time-consuming process of tuning the dipole element lengths at each discrete frequency.

Notwithstanding the above applications, the ALP-100 can also be used for test site comparisons, shielding effectiveness tests of large enclosures, field monitoring, site surveys and other general purposes.

Mounting

The mounting assembly for the ALP-100 incorporates a hinge mechanism to quickly and easily change the antenna polarization.

The assembly is equipped with a standard 1/4-inch x 20 mounting hole, which allows it to be affixed to Com-Power’s AT-812 Antenna Tripod, AM-400 Antenna Mast, or any other similar structure with compatible mounting arrangements.