Part Number

G Series

• If your ABS module has a part number, you must match that. If the part # starts with a G and does not have the dimple top that is a match for this listing.
• 15 total pins, 3 connectors (11-2-2 pins) and flat top. 
• EBCM is free and clear of rust or corrosion.
• ***NOTE: The side connector latch plastic is chipped off. You may need to rig a latch tie down however we believe this unit should install without issue. See pictures and do not purchase if you believe this will be an issue for you.***

Fitment

 You must match your module style and connector pins for proper fitment. GM made a couple different circuit boars and pin layouts. If you do not match your style and pin layout you more than likely will get a no communication situation.

• Prior to purchase please verify your wheel speed sensors are good or have been replaced and that your wiring harness has no breaks as both of these situations can set trouble codes. 
• EBCM may require initialization to your vehicle

Tech Notes

Module has been repaired and tested by our experienced technical staff! Some of those tests are listed below:
• Solder joints that typically fail have been repaired
• 12+ internal components tested and repaired as necessary
• Relay which typically fails has been replaced  
• ***NOTE: The side connector latch plastic is chipped off. You may need to rig a latch tie down however we believe this unit should install without issue. See pictures and do not purchase if you believe this will be an issue for you.***

Install Notes

Please follow below for proper installation of module:
• Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
• Disconnect and remove module to be replaced. Make sure connector harness is clean and there are no broken wires. 
• Install and connect the replacement module. 
• Connect the negative terminal of the battery.
• After install clear Diagnostic Trouble Codes and drive vehicle for 10-15 miles.
• Clear codes again and no codes should reappear.   

Optional Core Refund

If you would like to send your ABS module back to us for a $20 refund, please let us in the "Notes to Seller" box and we will include a prepaid return label with your order. It's that simple! Again, this is optional and you are not obligated to send your ABS module back to us.
• We will not be able to issue a core refund for units that have been completely destroyed by rust.

Warranty

This EBCM carries a 6 Month warranty from the date of purchase. Please keep a copy of your sales record which we will send with your order.