Electric shock chastity cage - 3D printed

The best seller in chastity cages is now available with a shock!
The shock unit is mounted to the main chastity ring, ready to use. Your gentle balls are resting on metal pins emitting sock impulse controlled from up to 15 meters away by a remote control.

Get sizes recommendations by our anonymous AI:

SIZE CALCULATOR

The curved base rings fit tightly against the pubic bone meaning the vulnerable underside of the scrotum is exposed, sitting on the metal pins with nowhere to hide!

Then shock delivers a short intensive blast, just to remind the submissive who is in charge. A devious invention for erotic pain = No chance of erection, while getting extra punishments via electric shocks.

Please note the 3D Printed Guardian cages and Base Rings are interchangeable with other accessories of the same type.

Please use it at your own risk and responsibly - Test your limits before trying it to your balls.

Made of Nylon material, this cage is one of the most comfortable and lightweight we ever made. This model offers sizes of options to choose from. Very solid and sturdy, suitable for long term chastity wear.
It is 3D printed per order and delivered accordingly. We use the V2Guardian model with premium paint - The color does not get porous and stays even after showers. The shock unit is not waterproof.

It includes one cage tube, 1 ring with shock unit +1 integrated lock + 1 remote.

Check out the spare shock cage on this link.

Measure for the base ring

Measure the circumference around your cock from behind the balls. You can use a fabric tape measure (the kind dressmakers use) to get the measurement, or, if you don’t have one, you can use a piece of string and a ruler. Wrap the tape measure or string around your cock, going behind the balls. The tape should be snug but not tight.

Now you have your circumference you need to divide it by 3.14 to get the diameter. We’ve done some sample calculations below to show you how it works:

In imperial:7 inches ÷ 3.14 = 2.25 inches diameter
6.25 inches ÷ 3.14 = 2 inches diameter
5.5 inches ÷ 3.14 = 1.75 inches diameter
4.7 inches ÷ 3.14 = 1.5 inches diameter

Measure for the Cage Tube

Ideally, you want a cage that is just long enough to allow the tip of your penis to come to rest at the end of the cage.

Take a ruler and place it on the underside of your flaccid penis, measuring from tip to base. Do not press the ruler into your scrotum, as this will give you an incorrect measurement. Just allow the ruler to make contact with the skin there. You should be completely flaccid when taking this measurement, but not the “retracted inside the body because it’s cold or scared” type of flaccid. For accurate results, take this measurement several times throughout the day, to find your most common length. When you have found your measurement, deduct a ¼ to a ½ inch off the final results and this will be your ideal length for a cage.

SIZES AND OPTIONS:

Micro: Total length : 50mm/1.97inch - Internal width 33mm/1.26inch

S: Total length : 60mm/2.36inch - Internal width 36mm/1.42inch

M: Total length : 75mm/2.95inch - Internal width 37mm/1.45inch

L: Total length : 85mm/3.34inch - Internal width 37mm/1.45inch

XL: Total length : 100mm/3.93inch - Internal width 39mm/1.54inch

Rings sizes available:

• 1.49'' / 38mm ring
• 1.57'' / 40mm ring
• 1.80'' / 46mm ring
• 1.96'' / 50mm ring
• 2.16" / 55mm ring
• 2.36" / 60mm rin
• 
  Colors available: Pink / Black / Red / White
  

This item is made to order and 3D printed. Processing time might vary from 2 days to 8 days depending on orders volume.

HOW WE MAKE IT?