Shopping security
The Xantrex Freedom XC 1000 True Sine Wave Inverter/Charger (817-1050) is a compact, all-in-one power solution designed for marine, RV, commercial vehicle, and off-grid applications. Combining a 1,000-watt true sine wave inverter with a 50-amp multi-stage battery charger, the Freedom XC delivers clean, reliable AC power while efficiently managing battery charging from shore or generator power.
True sine wave output ensures safe operation of sensitive electronics, including laptops, navigation systems, TVs, medical devices, and audio equipment. The integrated automatic transfer switch provides seamless switching between inverter and AC input power, simplifying installation and improving system reliability.
Built for demanding mobile environments, the Freedom XC 1000 features marine ignition protection, robust electrical safeguards, and a compact footprint ideal for tight installations. With optional remote monitoring and advanced battery management, this inverter/charger is an excellent choice for dependable onboard and mobile power.
True Sine Wave Output: Provides clean 120V AC power, ensuring your sensitive electronics run cooler, quieter, and more efficiently.
Extended Surge Rating: Capable of delivering 2000 Watts of peak power for 2 seconds to start high-draw appliances like small refrigerators or power tools.
50A Multi-Stage Charging: Features a "smart" charger that can be programmed for Flooded, Gel, AGM, or Lithium (LiFePO4) batteries, ensuring your house bank is topped off quickly and safely.
Integrated Transfer Switch: Automatically switches between shore power and battery power in less than 20 milliseconds, so your clocks and electronics don't reset when you unplug from the dock.
Cold Climate Performance: Engineered to operate in temperatures as low as -4°F (-20°C), making it a favorite for four-season RVers and northern boaters.
1 x Freedom XC 1000 Inverter/Charger Unit: The main power module featuring the integrated display and 30A transfer switch.
2 x Battery Terminal Covers: Red and Black snap-on boots to protect the DC input lugs from accidental shorts.
2 x Terminal Nuts & Washers: High-conductivity hardware for securing your 1/0 or 2/0 AWG battery cables.
1 x AC Input/Output Wiring Compartment Cover: A removable plate to protect the AC terminal block connections.
1 x Strain Relief Bushings Set: For securing the AC Romex or marine cable as it enters the chassis.
1 x Detailed Owner’s Guide: Contains the wiring diagrams, programming codes for different battery types (AGM/Lithium), and mounting templates.
1 x Quick Start Guide: For experienced installers needing the core configuration settings at a glance.
To avoid a mid-project trip to the store, remind your customers that the following essential installation components are sold separately:
DC Battery Cables: Usually 1/0 AWG or 2/0 AWG depending on the length of the run.
Inline Fuse & Fuse Holder: A 150A ANL or Class-T fuse is mandatory for safety.
Remote Control Panel: While the unit has a built-in screen, the Freedom X Remote (808-0817) is sold separately for those who want to monitor the system from their dashboard.
Mounting Screws: Because mounting surfaces vary (wood, fiberglass, or metal), screws are typically provided by the installer.
Inverter Type: True Sine Wave
Continuous Power Output: 1,000 watts
Surge Power: 2,000 watts
DC Input Voltage: 12 VDC
AC Output Voltage: 120 VAC ±5%
Output Frequency: 60 Hz ±0.05%
Maximum AC Output Current: 8.3 amps
Peak Efficiency: Up to 90%
No-Load Power Draw: Low idle consumption
Charging Output: 50 amps
Charger Type: Multi-stage smart charger
AC Input Voltage: 120 VAC, 60 Hz
Power Factor Corrected: Yes
Battery Types Supported: Flooded, AGM, Gel (selectable)
Automatic Transfer Switch: Yes
Transfer Time: < 30 ms
AC Connections: Hardwire terminals
DC Connections: Battery terminals
Remote Panel Support: Optional Freedom XC remote
Overload and short-circuit protection
Over-temperature shutdown
High and low battery voltage protection
Ground fault protection
Ignition protected (marine compliant)
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: -4°F to 140°F (-20°C to 60°C)
Cooling: Variable-speed, temperature-controlled fan
Dimensions (L × W × H): Approx. 13.5″ × 7.5″ × 4.0″
Weight: Approx. 10 lb (4.5 kg)
Mounting: Horizontal or vertical
UL 458
Marine ignition protection compliant
FCC Class B
1-Year Manufacturer Warranty
Wire Gauge Matters: For a 1000W inverter at 12V, you are pulling significant amperage. Use at least 1/0 AWG marine-grade tinned copper cables for runs under 5 feet to prevent voltage drop and overheating.
Overcurrent Protection: You must install a fuse (typically a 150A ANL or MRBF fuse) on the positive cable as close to the battery bank as possible to protect the vessel from a short circuit.
Remote Panel: While the unit has a built-in display, if you are mounting the XC in a lazarette or under a seat, consider the Xantrex Remote Panel (808-0817) to monitor your battery levels from the cabin.
Ventilation: Ensure at least 3 inches of clearance around the cooling fans. This unit is high-efficiency, but it still generates heat when charging at 50A or inverting at full load.
WARNING: This product can expose you to chemicals including Diisononly Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Ships within 48 hours · Estimated delivery Jun 20 - Jun 25
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order