Shopping security
DS18 is proud to offer the only plug and play front speaker kit for the Jeep JL, JLU, and JT. This easy to install ensure comes with everything you need preassembled to get amazing sound out of your front stage with high powered DS18 Neodymium pro audio speakers! These 6.5 Neos are rated at 150w RMS and 300w peak power so you will get much more sound and clarity in just a few minutes of installation time. These plug right into your existing wiring harness and connections and can be powered easily by your factory amplifier. Alternatively, you can add an external amplifier for even more power and loudness!
Highlights





| Specifications | |
| Nominal Diameter | 6.5" |
| Nominal Impedance | 4 Ohms |
| RMS Power Handling | 150 Watts |
| MAX Power Handling | 300 Watts |
| Sensitivity (1w/1m) | 96 dB |
| Frequency Response | 100Hz - 10KHz |
| Recommended HI Pass Crossover | 120Hz |
| Motor | |
| Voice Coil Diameter | 1.5" |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAW |
| Cone Material | Paper |
| Surround Material | Cloth |
| Basket Material | Steel |
| Magnet Material | Neodymium |
| Magnet Weight | 3 Oz |
| Thiele & Small Parameters | |
| Equivilant Volume | Vas 4.463 Ltr |
| Excursion (one way) | Xmax 1.5 mm |
| Free Air Resonance | Fs 138 Hz |
| Mechanical Factor | Qms 4.249 |
| Electrical Factor | Qes 0.977 |
| Total Factor | Qts 0.794 |
| Mechanical Mass | Mms 7.166 gr |
| Mechanical Compliance | Cms 148.927 u/M/N |
| BL Factor | BL 4.767 |
| Voice Coil Inductance | Le 0.08696mH |
| Cone Area | Sd 145 cm² |
| DC Resistance | Re 3.2 Ohms |
| Mechanical Mass w/o air | Mmd 6.159g |


Ships within 48 hours · Estimated delivery Jun 28 - Jul 3
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order