Kids will love plastic model building!
Extra single-blade nipper designed for kids!

Easy to use and safe for kids.
The nipper is small but has a smooth cutting edge that makes cutting out parts fun.
Small shape for easy holding in small hands and has an openable cutting edge.
Safety-conscious cutting-edge shape with the tip cut off.
Please try Kids Nipper EX, which GodHand has earnestly considered.

Short grip for easy holding
Thick grip for easy use
Non-phthalic acid-made grip reduces health hazards in case of accidental ingestion.
Single-edged blade structure for sharpness and durability. Possible to use it in the same way as Ultimate Nipper and Blade One Nipper
The sharpness of the blade prevents parts from flying away. Safe to work on a kid’s desk.
Cutting off the blade tip prevents injury even if accidentally touched.
The modified blade tip may reduce parts damage even if messily cutting the gates.
Nipper cap with snap fast for safe storage.

Kids Nipper EX
Product Code：GH-KPN-95
Quality Indication
Material: Special tool steel (made by Kobe Steel, Ltd.)
Total length: approx. 95 mm
Weight: approx. 50 g
Blade hardness: ≧ HRC58
Single-edge specification
Blade breakage prevention stopper
Over-opening prevention pin
Spring loaded
Soft grip
With original nipper cap
Cutting capacity
Target materials: Plastic (PS resin, PP resin, ABS resin, PE resin) only
Cutting capacity: Materials of < 3 mm dia. 　However, transparent and translucent PS resins are limited to < 2 mm dia for hardness.

⚠NOTE
The nippers are delicate and sharp. If misused, the blades may chip or break.
The blade can cut plastics with ease and precision. Please do not grip the nippers with excessive force.
The blade is thinner toward the tip and is more likely to break. Please cut as close to the center of the blade as possible.
Please do not twist the blade during cutting or releasing from the runner. Twisting may cause it to break under load.
Please do not cut plastics that are too long for the blade. The load will be applied to one point, causing it to break or bend.
Please do not use for cutting plastics that exceed the cutting capacity or materials that are not compatible (metal, resin, paper, and other materials besides plastic).
Please do not use cutting materials such as plastic plates, tags, parts, or dowels.
Please remove chips from the blade with a toothbrush (a blade brush) during and after use.
Cutting with chips remaining on the blade may cause excessive load and damage.
In particular, cutting with chips stuck in the base of the blade can easily cause misaligned.
Please do not touch the cutting edge directly. The cutting edge is sharp and may get injured.
Sebum may cause rust. If you touch the metal parts directly, wipe off any fingerprints and dirt, and apply rust-preventive oil.
Humidity may cause rust. Please oil more often, even during the rainy season.
Poor lubrication of moving parts causes wears on the shaft and rattling, leading to reduced sharpness. Please lubricate the moving parts regularly.
Please wear protective glasses for safety.
Cutting materials may fly away. Please be sure no one or fragile objects are around before use.
Please keep out of reach of children.
Please put on the attached nipper cap for safekeeping.