Consort Claudgen�s LC Landlord Control Heating System is an ideal heating system for student accommodation, hotels, or anywhere where a central control unit is required to control the temperature of all heaters in a building or rooms. It consists of an MLC controller and one or more LC controllers connected to Consort�s RX or SL heaters.

The MLC can control any number of LC depending on the building construction. It sets the same 7-day programme with 6 time settings per day for all LC controllers.

Mains powered
Controls an unlimited* number of LC controllers
Sets the same 7-day programme and time for all LC controllers
2 operating modes:
� 7-day programme
� When the temperature on LC controller is adjusted, the new temperature is maintained until the next programme overrides it.
� Constant temperature
� When the temperature on LC controller is adjusted, the new temperature is maintained for the landlord set period of up to 4 hours. It then reverts to the fixed temperature.
Simple to set up and easy to programme
Large backlit LCD display for easy reading
Stylish and sleek modern design
Option to limit min/max temperature
Temperature display of either degrees Celsius or Fahrenheit
* Only limited by building construction.

6 temperature settings per day
7-day heating programmes per week
Half heat when approaching target temperature **
Maintains temperature within 0.5�C
Set temperature in 0.5 degrees increments
Reduced power consumption in standby mode
** Half heat feature does not apply to 0.5kW and 0.8kW heaters.