About the product

One of the most easy to setup and most flexible IO Modules on the market. This module provides the best value per point with the lowest footprint and will make you deliver any BMS project on time and budget. The module has 8 Universal Inputs, 12 Digital Inputs, 6 Analog Outputs, 12 Digital Outputs and is ideal for larger projects.

This module is fully compatible with any Modbus or Bacnet system including the following: Tridium Jace3, Jace6, Jace8000 Compatible, Trend IQ3, IQ4 Bacnet IP Compatible, Siemens PX range, Cylon Bacnet controllers, Schneider Electric StruxureWare Bacnet controllers, OSS NeOSS building management controller, Priva Blue ID, Distech EC Bos, DELL EDGE GATEWAY 5000, Compatible with any Honeywell Centraline Hawk, Delta Controls Compatible IO Modules

Inputs & Outputs

• Temperature input support the following types of sensors: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1, Pt1000, Ni1000
• For sensor Pt1000 and Ni1000 use only 16bit resolution
• Voltage input 0-10VDC: input resistance 100k accuracy 0,1% measurement resolution 3mV@12bit and 1mV@16bit
• Current input 0-20mA -Required external resistor: 200 , sold separately
• Resistive input 0-1000k: measurement resolution for 20k load 20@12bit and 1@16bit
• Dry contact input

• Dry contact inputs
• Fast pulse counter up to 100 Hz

• Output 0-10V DC maximum load up to 20mA
• PWM: 0,01Hz, 0,1Hz, 1Hz, 10Hz, 100Hz

• Relay output (NO) max. 3A, 250 VAC/30 VDC

• Cortex-M3

• Interface RS485 half duplex
• Up to 99 devices on the bus
• Protocols: MODBUS or BACnet
• Baud rate: 2400 to 115200 bps

• 24V AC/DC

• Dimension: 160x110x62 mm.
• Construction: plastic, self-extinguishing (PC/ABS)
• DIN rail mounting (DIN EN 50022 norm)
• Cooling: internal air circulation

• Operating temperature: -10C to 50C
• Storage temperature: -40C to 85C
• Relative humidity: 5 to 95%, no condensation
• Ingress Protection Rating: IP40 for indoor installation

Do you have a question about this product?

In the DOWNLOAD session you can find:
The ISMA driver for Niagara, which contains the ISMA device Palette
ISMA configurator which is needed for updating firmware and configure modules

For any help please contact our support here